Shanghai Moopec Ltd
High Industry Performance Delivered-Moopec
Add to Cart
| Dimensional and Shape Tolerances | ||||||
|
Nominal Thickness (mm) |
Nominal Thickness Tolerance (mm) | Longitudinal Thickness Tolerance (mm) | Traverse Thickness Tolerance (mm) |
Width Tolerance (mm) |
Flatness (％) |
Camber within 2m |
| 0.18 | ±0.015 |
≦0.020 |
≦0.010 |
0~+1 |
≦1.5 |
≦0.9 |
| 0.20 | ±0.015 | |||||
| 0.23 | ±0.020 |
≦0.025 |
≦0.015 |
|||
| 0.27 | ±0.025 | |||||
| 0.30 | ±0.025 | |||||
| 0.35 | ±0.025 | |||||
|
Notes: a. The traverse thickness deviation refers to the thickness difference between the center of the steel plate and 15mm from the edge. b. The longitudinal thickness difference is the difference between the maximum thickness and the minimum thickness measured along the length direction (parallel to the rolling direction) on any steel strip with a length of 2m. c. Please feel free to contact us if you have special requirements. |
||||||
Recommended Applications
Grain-Oriented Electrical Steels are widely used as shown in the following table.
| Applications | Conventional | High Induction | Domain Refined High Induction |
| Large motors | ★ | ★ | |
| Large transformers | ★ | ★ | ★ |
| Medium&small transformers | ★ | ★ | ★ |
| Distributing transformers | ★ | ★ | |
| Voltage regulator | ★ | ★ | |
| Reactor&magnetic amplifier | ★ | ★ | ★ |
| IF transformers | ★ | ★ | |
| Mutual inductor | ★ | ★ | |
| TV transformers | ★ | ★ | |
| Radio transformers | ★ | ★ | |
| Radio broadcast transformers | ★ | ★ |