Shanghai Moopec Ltd
High Industry Performance Delivered-Moopec
Add to Cart
Electrical Steel
Electrical steel, also called laminated steel, silicon electrical steel, silicon steel or transformer steel. As the most-commonly used materials among all soft magnetic materials, electrical steel is used to produce certain magnetic cores, such as the stator and rotor in transformers and motors.
Electrical steel is classified into two types: Non-oriented (NO) electrical steel and Grain-oriented (GO) electrical steel. NO steel is widely used in motors and generators, in which the magnetization direction is rotated in the sheet plane. GO is mainly used as a core material of transformers, in which the magnetization direction is unidirectional.
Grain-Oriented Electrical Steel is an electrical steel in which the easy magnetization direction of the grain is parallel to the rolling direction and the silicon content is about 3%.
●Exhibits excellent magnetic properties in one direction (the rolling direction) of the steel sheet
●Features excellent magnetic properties, including high magnetic flux density, low iron loss, and low magnetostriction
●Typical applications: power transformers, distribution transformers, audio transformers, current and potential transformers, medium to large generators, reactors, and magnetic shields.
| Products Standard Dimensions | ||
| Nominal Thickness | Nominal Width | Inside Diameter |
| 0.18 0.20 | 850~1200 | 508±10 |
| 0.23 0.27 0.30 0.35 | 700~1200 | 508±10 |
| Dimensional and Shape Tolerances | ||||||
|
Nominal Thickness (mm) |
Nominal Thickness Tolerance (mm) | Longitudinal Thickness Tolerance (mm) | Traverse Thickness Tolerance (mm) |
Width Tolerance (mm) |
Flatness (％) |
Camber within 2m |
| 0.18 | ±0.015 |
≦0.020 |
≦0.010 |
0~+1 |
≦1.5 |
≦0.9 |
| 0.20 | ±0.015 | |||||
| 0.23 | ±0.020 |
≦0.025 |
≦0.015 |
|||
| 0.27 | ±0.025 | |||||
| 0.30 | ±0.025 | |||||
| 0.35 | ±0.025 | |||||
|
Notes: a. The traverse thickness deviation refers to the thickness difference between the center of the steel plate and 15mm from the edge. b. The longitudinal thickness difference is the difference between the maximum thickness and the minimum thickness measured along the length direction (parallel to the rolling direction) on any steel strip with a length of 2m. c. Please feel free to contact us if you have special requirements. |
||||||
Product Specification
|
Types |
Nominal Thickness (mm) |
Baosteel |
WISCO |
NSC |
JFE |
TKS |
POSCO |
|
Convertional |
0.23 |
B23G110 | 23Q105 | ||||
| 23Q110 | 23Z110 | C110-23 | |||||
| 23Q115 | |||||||
| B23G120 | C120-23 | ||||||
|
0.27 |
|||||||
| B27G120 | 27Q120 | 27Z120 | 27JG120 | C120-27 | 27PG110 | ||
| B27G130 | 27Q130 | 27Z130 | 27JG130 | C130-27 | 27PG120 | ||
| 27Q140 | C140-27 | 27PG130 | |||||
|
0.30 |
30PG110 | ||||||
| B30G120 | 30Q120 | 30Z120 | 30JG120 | 30PG120 | |||
| B30G130 | 30Q130 | 30Z130 | 30JG130 | C130-30 | 30PG130 | ||
| B30G140 | 30Q140 | 30Z140 | 30JG140 | C140-30 | 30PG140 | ||
| 30Q150 | C150-30 | ||||||
| 30Q160 | |||||||
| 30Q180 | |||||||
| 30Q220 | |||||||
|
0.35 |
B35G135 | 35Q135 | 35Z135 | 35JG135 | |||
| B35G145 | 35Q145 | 35Z145 | 35JG145 | C150-35 | 35PG145 | ||
| B35G155 | 35Q155 | 35Z155 | 35JG155 | C165-35 | 35PG155 | ||
|
High Induction |
0.23 |
B23P090 | 23QG090 | 23ZH090 |
23JGS090 23JGH090 |
H090-23 | 23PH090 |
| B23P095 | 23QG095 | 23ZH095 |
23JGS095 23JGH095 |
H095-23 | 23PH95 | ||
| B23P0100 | 23QG100 | 23ZH100 | 23JGH100 | H100-23 | 23PH100 | ||
| 23ZH110 | |||||||
|
0.27 |
H090-27 | ||||||
| B27P095 | 27QG095 | 27ZH095 | H095-27 | 27PH095 | |||
| B27P100 | 27QG100 | 27ZH100 | 27JGH100 | H103-27 | 27PH110 | ||
| B27P110 | 27QG110 | 27ZH110 | 27JGH110 | ||||
|
0.30 |
B30P100 | 30QG100 | 30ZH100 | 30JGH100 | 30PH100 | ||
| B30P105 | 30QG105 | 30ZH105 | 30JGH105 | H105-30 | 30PH105 | ||
| B30P110 | 30QG110 | 30ZH110 | 30JGH110 | H111-30 |